BLCDN - SAVIN PRISM I DRY BLACK INK/TONER 8221
- MSDS: BLCDN
- Manufacturer: SAVIN CORP
- Product Name: SAVIN PRISM I DRY BLACK INK/TONER 8221
- National Stock Number: 6850-00N017217
Product Identification
Product ID:SAVIN PRISM I DRY BLACK INK/TONER 8221
MSDS Date:07/19/1989
FSC:6850
NIIN:00N017217
MSDS Number: BLCDN
Responsible Party
STAMFORD, CT 06904
US
Emergency Phone: 301-921-8503
Info Phone: 301-921-8503
Cage: 29382
Contractor
Telephone: 203-967-5000
Cage: 29382
Ingredients
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3; 9192
POLYESTER RESIN
STYRENE-ACRYLIC RESIN
POLYPROPYLENE WAX
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: SKIN: NON-IRRIT. EYE:
NON-IRRITANT. MINIMAL IRRITATION TO RESPIRATORY TRACT MAY OCCUR AS
WITH EXPOSURE TO LARGE AMOUNTS OF ANY NON-TOXIC POWDER.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:ACCUMULATION OF DUST IN THE
RESPIRATORY SYSTEM.
First Aid
First Aid:INHAL: REMOVE TO FRESH AIR, CONSULT PHYSICIAN IF SYMPTOMS
PERSIST. EYES: IN CASE OF CONTACT, IMMEDIATELY FLUSH EYES WITH
COPIOUS QUANTITIES OF WATER FOR AT LEAST 15 MIN. INGEST: CALL MD
IMMEDIATELY (F P N).
Fire Fighting
Lower Limits:28.2 G/M3
Extinguishing Media:WATER SPRAY, FOAM CO*2, DRY POWDER
Fire Fighting Procedures:THIS MATERIAL WILL BURN IN THE CASE OF FIRE.
THE DECOMPOSITION PRODUCTS ARE CO,CO*2, AND NO*X. WEAR NIOSH/MSHA
APPROVED SCBA AND FULL PROT EQUIP .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:SWEEP UP OR CLEAN UP WITH A VACUUM CLEANER
(USE A GROUNDED VACUUM CLEANER).
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NO SPECIAL STORAGE REQUIREMENTS ARE
NEEDED FOR SAFETY REASONS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:NONE SPECIFIED BY MANUFACTURER.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:UNDER NORMAL INTENDED USE NO SPECIAL
HANDLING, PROTECTIVE CLOTHING NOR SPECIAL EQUIP ARE REQUIRED. AVOID
INHALATION.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Spec Gravity:1.1
Solubility in Water:INSOLUBLE
Appearance and Odor:FINE ODORLESS POWDER (BLACK COLOR).
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR BASES.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:PHENOL DERIVATIVES, CARBON MONOXIDE
WHEN HEATED AT HIGH TEMPERATURES. (>300 C)
Disposal
Waste Disposal Methods:LANDFILL OR INCINERATE IN COMPLIANCE WITH
FEDERAL, STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.